Tips From the Moving Company Pros: Ways To Move a Pinball Maker



With pinball making a big renewal across the nation, Mild Giant wishes to ensure that these timeless, beautiful devices remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

In the beginning glance, pinball devices can appear daunting to move due to the fact that of their weight, size, and fragility. Luckily, our skilled Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of modern pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball machines had their headboxes bolted on, using either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later devices have hinges and utilize a locking system to keep the headbox upright. There might also be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you require to get rid of the headbox rear access panel to acquire access to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but gradually the secret might have been lost. Quite often, there is a screw keeping this panel in place.

When within, remove the bolts and unplug the large ports that have circuitry going down into the machine. You may wish to identify these adapters to put them back in the right spot, but they must be various sizes, making it hard to plug back incorrectly.

You can now remove the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs

For early Strong State Pinballs, you will have to get rid of the back glass. There is a lock situated on the headbox in one of 3 locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

When opened, get rid of the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Open up the back box light panel by raising the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires going down into the machine. You may want to identify these plugs to put them back in the best area. You might not require to remove the plugs, as the wiring ought to be long enough to enable the headbox to be folded down.

At this point, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the device. This is a basic setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within his comment is here if you can not fold the head box down. There is a lock situated at the top of the back glass in the. Utilize the provided secret to unlock, and get rid of the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will require to get rid of the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Maker legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be gotten rid of, and the legs will come off.

These threaded plates and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will have to open up the front door of the pinball, slide out the playfield glass, and lift up the playfield.

With the front door (coin door) open, move the lock down bar latch across and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by placing your hand where the ball drains, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. As soon as any nuts have actually been eliminated, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready to transport your pinball machine. Prior to you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball using a van or SUV, it may be easier to remove the legs simply prior to filling the device. Grab a buddy to have and help one of you supporting the pinball, while the other gets rid of the front legs.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop all of a sudden!

For Electro-Mechanical pinball machines, you need to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs within. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to filling the maker. Get a buddy to have and help one of you supporting the pinball, while the other check here gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *